The Most Recent In Carbide Endmill Designs In A Extended And Successful Line From Iscar

The Most Recent In Carbide Endmill Designs In A Extended And Successful Line From Iscar

Manufacturers and die & mold shops can abolish chatter problems in numerous milling operations with Iscar's new Chatterfree carbide endmill. The cutters' variable-pitch flute pattern annihilates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling. In addition, end users also report longer edge life due to reduced chatter. The chatter-free element is attainable in both solid carbide endmills and tips in Iscar's MULTI-MASTER replaceable-tip line. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for MULTI-MASTER tips. These completely new endmills are ideal for lower power machines with ISO40 or BT40 adaptations. The solid carbide version can handle full slot machining up to 2xD. Depth capability on the replaceable-tip construction is more bounded since the active length is shorter. In full slotting applications on alloy steel, the solid carbide variant conveniently handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

FINISHRED - Revolutionary Solid Carbide Endmills

Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a revolutionary solid carbide endmill family. The Finishred carbide endmill is a blending of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more rapidly and efficiently than traditional endmills. Nevertheless, roughing endmills leave grooves on the machined surface. Accordingly, after using a roughing endmill, a finishing endmill must to be used in order to obtain a flat surface finish. This means time-consuming tool change, setup time and essentialness of maintaining two endmill types in the inventory.

Features of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and 2 continuous flutes.

The cutting edges of the finishing flutes are radially further from the tool axis than the cutting edges of the serrated flutes. The finishing flutes remove the grooves caused by the roughing flutes, leaving a fine surface finish.

The tool is fully capable and enables running at rough machining parameters, resulting in finish surface quality.

The unique tool design lessens vibration at high load applications.

The tool produces short and long chips simultaneously. This chip mixture is evacuated more successfully than each individual chip type, an remarkable solution in slotting and cavity milling applications.

The Finishred is also available with the Multi-Master indexable milling head option which couples the Finishred features with the advantage of little setup time, no regrinding costs and the wide range of shank and extension choices are available for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore lowering stock.

Tool change and setup time can be eradicated.

An extra tool position is gained on the machine

New Chip Splitting Solid Carbide Endmills for High Metal Removal Rates

ISCAR is establishing the ECP-3/4L family of chip splitting endmills. The brand new endmills are obtainable with three and 4 38 degree flutes in grade IC900. They feature 2xD and long shanks with reduced neck diameter, which enable machining along high shoulders, at high feeds. These endmills, due to their chip splitting capability and force distribution can be used very comfortably on low power machines (CAT40/BT40/ISO40). The serrated cutting edge includes flat peaks which leave a better surface finish, in comparison to the current rougher carbide endmill. The ECP endmills are endorsed for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be used on alloyed steel as well. All of the preliminary tests conducted at several customers' locations showed excellent results.

Numerous Advancements Have Multiplied Iscar's Line Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Iscar Adds Their Latest Innovations To A Extensive Line Of Outstanding Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Recently Releases Numerous Revolutionary Lines To Increase Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

New End Mills Coming From Iscar Will Enhance Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Some Of The Many Improvements In Carbide Inserts Coming From Iscar From Over The Years
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Documentation To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Automotive Manufacturing Jobs - What To Look For And Why.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

The Truth About The Graduate Professions Offered In Europe.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.

Commercial Water Heater- Which Is Best For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.